聚甲醛树脂在分解时会产生气体，主要是甲醛。当干燥或熔化树脂并有气体产生时，要避免接触皮肤和眼睛，也不要呼吸上述气体。不要接触热的树脂。当进行树脂干燥和熔化时，需要进行局部通风并穿戴防化学品手套,化学安全眼镜等。一旦出现紧急情况时，请拨打以下电话:
上海：+86-21-6841-1345 (旭化成塑料(上海))
香港：+852-2522-7875 (旭化成塑料(香港))
日本：+81-44-271-2417或+81-44-271-2561 (旭化成)
* 与日本联络时，请用日语或英语。
燃烧性能

由于TENAC™(铁耐克)和TENAC™-C(铁耐克-C)是易燃品，在处理和储存时，请将它们保持远离热源，火花和火焰。发生着火时，通过热分解和燃烧可能会产生刺激性的和剧毒的气体。应当使用水或泡沫灭火剂作为灭火介质。
处理

按照有关规范在具有适当装备的焚烧炉里焚烧，或者予以掩埋。任何处理实践都必须符合地方和国家的法律和规则(关于具体的规则，请联系地方或州环境机关)。在焚烧过程中，可能会产生刺激性和剧毒的气体。不可倾倒在下水道中,地面上或任何介体中。

保持远离火焰和热源。要避免出现袋子破损，撕裂和触水。要保证稳固,安全的袋子装载和堆叠。
注塑

当聚甲醛处于230ºC (446ºF)以上温度时，或当熔融的聚合物接触到强酸，氧化剂或聚氯乙烯时，TENAC™(铁耐克)会发生分解。

当聚合物处于250ºC (482ºF)以上温度中时，或当熔融的聚合物接触到强酸，氧化剂或聚氯乙烯时，TENAC™-C(铁耐克-C)会发生分解。

当有小粒溢出到工作区域时，应当立即予以清除，以防滑倒。

A1

Open "Customer Information Registration Screen" and enter required data. When registering, you need to read "Notes on using this site", "Terms and Conditions for Registered Users of the Site", and "Privacy policy". Your login ID and password are the very important information, so please remind you not to forget them. In particular, it is likely that your password might be used illegally by anyone instead of you. You should avoid using combination for your password, which anyone can easily guess, such as your name or birthday.

Q2.What kind of benefits do I have with registration?

A2

Registered customer can be provided our further services and information. And you can receive our special announcement and information regularly by e-mail, if you like. We appreciate your registration as our exclusive customer to use our special service and information.

Q3.What kind of information do I obtain here?

A3

We have offered our chemical product/technology information, including PMMA, Polyacetal, Polyamide, Modified Polyphenylene Ether, ABS/SAN. We are continuously expanding our delivery contents in AKchem.com for customer's further satisfaction.